Buoyancy Control Wing (16.8 kilo - 37 pound of Lift)

MSRP: USD$ 300.16
Was: USD$ 300.16
Now: USD$ 266.73
(You save USD$ 33.43 )
Write a Review
SKU:
WING-37lb-HL37W
Availability:
Usually Shipped within the Next Working Day
Shipping:
Free Shipping

XS Scuba  – Highland 37 lb  Bladder Wing (16.8 kg of lift)

The Highland (by XS Scuba) - 37 lb (16.8 kg of lift) Bladder Wing is engineered as a 360º ‘Full Circle’ design wing.

It is built-to-last with a 22-mil Thick Urethane Bladder and a 1000D Nylon Cordura with Urethane Lamination Outer-Cover.

The Cover Seams are Sewn with #138 Nylon Bonded Thread for Strength and Durability.

The Wing has three sets of 11" (27.9 cm) on-center grommets that are made from Heavy Nickel Plated Brass.

The Cover is equipped with a YKK #5-Delrin Zipper for access to the Bladder and the Over-Pressure Valve (OPV).

 The Over-Pressure Valve (with Pull-Dump Cord) can be mounted on the Lower left or right side of the wing, depending on choice.

The Wing comes equipped with a ‘Centre Mounted’ Inflator Assembly from the centre of the back of the wing.
 

The Inflator Mechanism is the Classic design Power Inflator which is also Built-to-Last.

- Easy to remove – easy to service – easy to replace.
 - Inflator Service Kits available ($25) -
 - Service Tool available ($15) -

The Inflator is equipped with a 1" (2.5 cm) Diameter Corrugated Oral Inflation Hose and a Durable Non-Corrosive Plastic Body with Chrome Plated Brass Quick-Disconnect (QD) Bayonet Fitting.

A ‘Miflex’ Low Pressure Quick Disconnect Inflator Hose comes standard with the Wing and Inflator.

The Highland by XS Scuba Wing is Black in color and is covered by a 24 month limited warranty.

This wing is designed to be used with a Back Plate and Twin Cylinder Bands or a Single Cylinder Adapter (see other listings).

FEATURES:

  • 360º full circle design
  • Three sets of 11 inch on center grommets
  • 22 mil thick urethane bladder
  • Cover 1000d nylon cordura with 
    urethane lamination
  • Heavy nickel plated brass grommets
  • #138 nylon bonded thread
  • Miflex low pressure quick disconnect inflator hose (MQD18-CN)
  • "Old School" tech inflator, center point attachment
  • YKK #5 Delrin zipper for access to the bladder
  • Right or left side OPV
  • Designed to be used with a Back Plate and Twin Cylinder Bands or a Single Cylinder Adapter
  • Free Shipping Within New Zealand

  • Direct Import
  • See our other listings

 

 

12 Months on Parts & Workmanship